|
Series A Bar Chairs
These BAR CHAIRS are ideal for light weight rebar (#6 and under), and are also used in precast work due to the small diameter legs (3/16 in)
| Series A | Size | Bar Size | Quantity per Carton |
|---|
| #302 |
3/4 in |
#2,3,4,5,6 |
1500 |
| #304 |
1 in |
#2,3,4,5,6 |
1500 |
| #306 |
1 1/4 in |
#2,3,4,5,6 |
1000 |
| #307 |
1 1/2 in |
#2,3,4,5,6 |
1000 |
|
 |
Series A #310
This BAR CHAIR is a multisided, multipurpose chair which will support any size rebar. Due to the strength and versatility, this chair can be usd as a beam bolster. End inventory nightmares with one chair that represents 4 heights.
| Series A | Size | Bar Size | Quantity per Carton |
|---|
| #310 |
3/4 in |
All rebar sizes |
500 |
|
1 in |
|
500 |
|
1 1/4 in |
|
500 |
|
1 1/2 in |
|
500 |
|
 |
Series A #311, #312
W.H.C.'s MINI-HIGH CHAIRS support light weight rebar (#6 and under), and are used primarily for bar spacing in walls and in tilt-wall construction.
Heights: 2 in, 2 1/4 in
Base dimensions: 1 1/2 in x 1 7/8 in
| Series A | Size | Bar Size | Quantity per Carton |
|---|
| #311 |
2 in |
#2,3,4,5,6 |
500 |
| #312 |
2 1/4 in |
#2,3,4,5,6 |
500 |
|
 |
Series B
W.H.C.'s INDIVIDUAL HIGH CHAIRS have a unique stacking feature which makes these chairs ideal for double mats. When used in tilt-wall construction, this stacking feature minimizes leg exposure. Note: Stacking feature - Made of High Density Polyethylene.
Manufacured heights: 2 in thru 6 in. These sizes are stacked to increase heights.
Base dimensions: 2 7/8 in x 3 5/8 in
|
 |
Series C
W.H.C.'s JOIST CHAIRS will accommodate a 4 in, 5 in, or 6 in joist. Those chairs also have the W.H.C. stacking feature. Made of HIgh Density Polyethylene
Heights: 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, 1 3/4 in
Base dimensions: 2 7/8 in x 3 5/8 in
|
 |
Series E
W.H.C.'s GRADE CHAIRS provide solid support on grade. They support #3, #4, #5, #6 rebar. Made of High Density Polyethylene.
Height: 2 3/16 in , 3 3/16 in
Base Diamter: 2 15/16 in
|
 |
| Sand plate for all Series A and G 3 1/2 in diamter
|
 |
SAND PLATES: Made of High Density Polyethylene. Available for Series B IHC's and Series C.
Base dimensions: 3 1/2 in x 5 in
|
 |
Series F
Plastic Dowel Tubes 1/2 in x 5 in, 3/4 in x 5 in
|
 |
Series G
To minimize inventory, each chair has two heights, is stackable, and will accommodate wire fabric or rebar. The legs on the chair allow for exposure (in) architectural finished concrete. Made of High Density Polyethylene.
Heights: 1 3/4 in, 2 in, 2 1/2 in, 3 in
Base dimensions: 2 3/8 in x 2 3/8 in
Thse chairs are stackable.
|
 |
|